Configuring a computer to support
Windows Vista
This appendix explains how to configure a computer to support
Dynamic Host Configuration Protocol (DHCP). All HN routers
come from the factory with DHCP enabled. Therefore, the
computer must have DHCP enabled and set to obtain IP addresses
automatically.
This appendix covers the following topics:
• Windows Vista on page 69
• Windows XP on page 72
• Windows 2000 on page 75
1. From the Windows desktop, select
Network Connections
A list of network adapters appears as shown in Figure 62. The
Local Area Connection-NIC Card
Appendix A • Configuring a computer to support DHCP
Appendix A
→
Start
.
must appear under the LAN
1037753-0001 Revision A
DHCP
→
Settings
69