Adtran Total Access 600R; Minimum System Requirements; Adtran Shipping Carton; Appendix E - Adtran Total Access 600R - Hughes HN7700S Installation Manual

Minimum system
requirements
ADTRAN shipping
carton

ADTRAN Total Access 600R

This appendix discusses how to install and configure the
ADTRAN Total Access 600R router as a T-1 transport device. It
covers the following topics:
• Minimum system requirements on page 99
• ADTRAN shipping carton on page 99
• Installing the ADTRAN 600R on page 100
• Connecting the ADTRAN on page 106
• Navigating the user interface on page 103
• Configuring the ADTRAN on page 107
• Confirming connectivity on page 115
At a minimum, your laptop must be equipped with the following
to successfully install the ADTRAN 600R:
• 32 MB RAM
• Pentium-compatible 166 MHz (or) faster
• 12 MB of hard disk space
• Windows 98 or later operating system
The ADTRAN shipment includes the items listed below. Make
sure you have all the items before you install the unit.
• The Total Access 600R unit with attached wallmount
brackets
• The Total Access 600 Series System CD - ADTRAN P/N
3253052
• Hardware revision notice card - ADTRAN P/N
61200624L1-17
• Mounting instructions - ADTRAN P/N 61200624L1-19
• RJ-45 to RJ-45 8-pin cable (6 ft) -ADTRAN P/N 3127004
• Cable tie (for securing attached cables) - ADTRAN P/N
3292032
• Four rubber feet (for table top installations) - ADTRAN P/N
3270BF003
• 3-prong, detachable power cord - ADTRAN P/N 3127009
Appendix E • ADTRAN Total Access 600R
1037753-0001 Revision A
Appendix E
99