Confirming Connectivity; Log Out Screen; Ping Far-End Ip Address - Hughes HN7700S Installation Manual

11. When all channels are configured, press CTRL+W to save
the changes.
12. Press H to return to the Home menu.
13. Press CTRL+L to log out as shown in Figure 102.
Figure 102: Log out screen

Confirming connectivity

To confirm connectivity to the NAP, ping the Far-End IP Address.
You entered this address from your FSO during the setup
procedures. Ping this address as shown in sample Figure 103.
Figure 103: Ping Far-End IP address
Confirm the ping is successful and proceed to Chapter 2 –
Preparing the HN router for installation on page 5.
Appendix E • ADTRAN Total Access 600R
115
1037753-0001 Revision A