Items required for
Wall unit
Confirming installer PC
and site requirements
Chapter 2 • Preparing the HN router for installation
6
1037753-0001 Revision A
Ensure the HN router shipping carton contains the items shown in
Figure 2.
installation
Cat-5 Ethernet cable
or
In-line
Power supply
Wall unit or in-line unit
Items provided in the remote terminal shipping carton
terr.cfg file (if you are
instructed to upload it)
Figure 2: HN router components
You must confirm that your PC (the installer laptop) and the
customer's computer meet specific requirements before you
install the HN router or the transport device. The installer laptop
PC must meet the following requirements:
Pedestal base
Installation specification
or work order
Items provided by the installer
• Ethernet enabled network interface card (NIC) and Ethernet
cable.
• Windows Vista, Windows XP, or Windows 2000 operating
system with DHCP configured to automatically obtain IP
addresses. See Appendix A – Configuring a computer to
support DHCP, on page 69.
Warranty
Remote
terminal
G-29716 C 05/19/08