Changing From Vsat To Router Mode; Advanced Commissioning Options Link - Hughes HN7700S Installation Manual

Changing from VSAT to
router mode
Chapter 5 • Commissioning the HN router
20
1037753-0001 Revision A
• Choosing auto selection or manual entry to enter service
parameters.
• Selecting the service provider.
• Selecting and verifying the service parameters.
• Entering configuration parameters.
• Restarting the router.
When you received the HN router in the installation package, it is
in the default VSAT mode. To use it as a router, you must change
the mode from VSAT mode to router mode.
To change the mode use the
link on the System Control Center page.
To access the System Control Center page:
1. Start a Web browser on your laptop. Type
http://192.168.0.1/fs/advanced/advanced.html
in the browser's address bar.
2. Press Enter.
3. The System Control Center home page displays.
Figure 8: Advanced Commissioning Options link
Advance Commissioning Options