Ds0 Mapping; Selecting The Map - Hughes HN7700S Installation Manual

Appendix E • ADTRAN Total Access 600R
112
1037753-0001 Revision A

DS0 mapping

The following procedure gives the steps to map DS0s.
1. From the main menu select DS0 Maps.
2. Verify the active map is set to Map 1.
3. Use the down arrow to select Edit/View Map 1 as shown in
Figure 97: Selecting the map
4. On the Edit/View Map 1 screen select the + sign and press
Figure 97. P
Enter to view the map options.