Configuring the Network Settings
The library automatically obtains an IP address from a DHCP server when the library is powered up.
The library also supports user-specified fixed addresses through the front panel. To set a fixed
address:
1.
On the Menu screen, touch Network in the Edit Options area.
2.
The IP Address Determination screen appears (see
Figure 31
IP address determination screen
Touch the IP Address Determination option (see
3.
IP Address option (see
Figure 32
User-specified IP address screen
Touch OK to confirm your selection.
4.
Touch each IP Address option and then use the keypad to enter each IP address (see
5.
Figure
33).
6.
Save and confirm your selections.
Figure
32).
Figure
31).
31) and then the User Specified
Figure
MSL6000 series tape library user guide
47