HP MSL6000 Series User Manual page 125

Table 10 Fault Symptom Codes (continued)
FSC Message
5014 Drive Already Loaded
(Cleaning operation failed because the
drive already has a cartridge inserted.)
5015 Expired Clean'g Cart
(Cleaning operation failed due to an
expired cleaning cartridge.)
5016 Not a Clean'g Cart
(Cleaning operation failed because the
loaded cartridge is not a cleaning
cartridge.)
5035 Drive Timeout Error
(Cleaning operation failed because the
drive timed out.)
503B Move Command Fail
(A front panel move operation failed.)
503C Clean Operation Timeout
(Cleaning operation failed because the
drive timed out.)
ERP
Press the Enter button to clear the
•
message.
• Invalid user initiated operation. Set
parameters correctly and try again.
• If the tape in the drive is not in use,
unload the drive and retry the cleaning
operation.
Press the Enter button to clear the
•
message.
Remove expired cleaning cartridge from
•
library and discard. Replace with new
cleaning cartridge.
Press the Enter button to clear the
•
message.
• Make sure tape in reserved slot is a
cleaning cartridge.
• Invalid user initiated operation. Set
parameters correctly and try again.
Press the Enter button to clear the
•
message.
• Invalid user initiated operation. Set
parameters correctly and try again.
• Ensure the drive shows good status
through the drive status window.
Press the Enter button to clear the
•
message.
• Invalid user initiated operation. Set
parameters correctly and try again.
Press the Enter button to clear the
•
message.
• Invalid user initiated operation. Set
parameters correctly and try again.
• Ensure the drive shows good status
through the drive status window.
MSL6000 series tape library user guide 125