HP MSL6000 Series User Manual page 65

Table 6 View SCSI Options (continued)
Option
Init Element Status
Test Unit Ready
Reporting
Device Capability Page
Length
Transport Element
Base Address
Storage Element
Base Address
Transfer Element
Base Address
Import/Export Element
Base Address
Product Identification
(PID)
Vendor Identification
(VID)
Post Recovered Errors
Description
Lets you specify the library's response to the SCSI
INITIALIZE ELEMENT STATUS command. The
possible settings are No Inventory, Force Inventory, and
Force Label Scan. The default is Force Inventory.
Lets you specify the response to a TEST UNIT READY
command if the library is in Sequential Mode. The
possible settings are Standard or Custom. The default is
Custom.
Lets you choose between two lengths of the mode
sense/select device capabilities page (SCSI page 1Fh),
which are Short (14 bytes) and Long (18 bytes), to
accommodate different SCSI device implementations of
this page. The default is Short (14 bytes).
Lets you set the base address for the robotics mechanism.
The default is 0x0.
Lets you set the base address for the magazine slots. The
default is 0x20.
Lets you set the base address for the tape drives. The
default is 0x1E0.
Lets you set the base address for the mail slot. The default
is 0x1C0.
Lets you specify the response of the library's robotics to the
SCSI INQUIRY command in the Product Identification
field. The default is MSL6000 Series.
Lets you specify the response of the library's robotics to the
SCSI INQUIRY command in the Vendor Identification
field. The default is HP.
Lets you specify whether or not recovered errors are
posted. The default is Disabled.
MSL6000 series tape library user guide 65