Scsi Option Selection Screen (Two-Drive Model Shown); Drive 0 Bus Id Screen - HP MSL6000 Series User Manual

Figure 20

SCSI option selection screen (two-drive model shown)

NOTE: You can move to the next sequential SCSI options screen by touching the
For example, to set the Drive 0 Bus ID to 3:
a. Select the box next to the text "Drive 0 Bus ID:." The resulting screen (see
the current Drive 0 Bus ID along with the new value that you request.
Figure 21

Drive 0 bus ID screen

b. Touch the block that contains the number 3. This places your request into the New data
field.
c. Touch the Save option to confirm your request. A confirmation screen is displayed (see
Figure
40 Library Configuration
22).
.
Figure 21) displays