Four Tape Drives, Dual Host System
Figure 19
shows a typical SCSI cable configuration for a library with four tape drives installed using
a dual host system.
4
1
SCSI Terminator
2
0.5 m cable (to library controller card)
3
Host cable (Bus 1, to host system)
Figure 19
MSL6060/MSL6052 library SCSI cable configuration (four tape drives, dual host system)
NOTE:
Daisy-chaining Ultrium 1840, 960 and 460 drives is not recommended due to degraded
performance.
CAUTION:
board.
38
Installation
1
1
5
6
Use the 19.8-inch (0.5m) cable
2
1
3
1
4
Host cable (Bus 3, to host system)
5
Host cable (Bus 2, to host system)
6
Host cable (Bus 0, to host system)
to connect the tape drive and the library controller