IP Addressing: You can manually configure the IP addresses for the LAN connections by clicking on their
respective configuration icons (pencil) and selecting Edit.
Bonding: Enhanced Speed
Configure both Ethernet ports to act together for speeds up to two times faster than a single LAN connection.
Before following the directions below, please make certain that your switch or router supports link aggregation.
1.
Connect LAN 1 and LAN 2 to the same switch or router.
2.
Go to Dashboard > Network and choose the Connections tab.
3.
If one LAN is not active, click on its configuration icon (pencil) to select Enable.
4.
With both LANs enabled, click on Create to configure bonding.
LaCie 2big NAS (OS 3.0) | LaCie 5big NAS Pro User Manual
88