LaCie ICA-312 User Manual page 18

Step 3: Install the Disk(s) in Disk Tray(s)
Find a suitable work area with adequate space and a flat, even surface. Make certain that all necessary
components are available:
LaCie 2big NAS disk tray
Hard disk
Disk tray screws. Use only the screws that are provided with your LaCie NAS.
Phillips head screwdriver. Make certain that the screwdriver is the correct size for the disk tray screws.
Caution: To avoid potential problems caused by electrostatic discharge (ESD), it is recommended that you
do not touch the hard disk's printed circuit board. As a further precaution against ESD, use an anti-static
wristband or an anti-static mat to ground yourself when handling the hard disk.
To secure the disk in the disk tray:
1. Place the empty disk tray onto the flat work area with the handle on the bottom left.
LaCie 2big NAS (OS 3.0) | LaCie 5big NAS Pro User Manual 18