Table of Contents
Advertisement
INSTALLATION STEPS
Step 1: Connect and Power on the Diskless Product
1.
Make sure that no disks are installed in the product.
2.
Connect the Ethernet cable to the Ethernet port on the back of the product and to an available Ethernet port
on your router. Refer to your router's documentation if necessary.
3.
Connect the power supply to a wall outlet and to the product.
4.
Push the power button on the back of the device to the ON position.
The front LED will turn on and then begin blinking blue. Once the LED stops blinking (less than one minute),
move on to the next step.
Step 2: Remove the Disk Tray Sticker and Empty Disk Tray(s)
Note on illustrations: To reduce complexity in the images, the Ethernet and Power cables have been
removed. LaCie recommends that you maintain both connections while continuing with the installation steps.
1.
Remove the sticker from the back of the device.
LaCie 2big NAS (OS 3.0) | LaCie 5big NAS Pro User Manual
15
Advertisement
Table of Contents
