Table of Contents
Advertisement
FRONT BUTTON
Use the front LED button to turn your device on/off or to enter/exit deep sleep mode.
Light Push
The default function for a light push on the front LED button is to turn the LaCie NAS on/off. If the device is on, a
light push should allow pending actions to restart with the device.
The front button function will change if deep sleep mode is enabled (see
Place the device into deep sleep mode if the device is on.
Wake up the device if it is in deep sleep mode.
Long Push
A long push tells the device to shut off immediately and force all operations to quit without being saved.
Factory Settings/Rescue
LaCie 2big NAS: The front LED button can be used in tandem with the ON/OFF switch to revert the device to its
factory settings (see
Reset to Factory Conditions - 2big
LaCie 5big NAS Pro: The front LED button can be used in tandem with the reset button on the rear of the
device to launch the LaCie NAS Rescue (see
LaCie 2big NAS (OS 3.0) | LaCie 5big NAS Pro User Manual
NAS).
LaCie NAS Rescue - 5big NAS
Eco
Management). A light push will:
Pro).
8
Advertisement
Table of Contents
