LaCie ICA-312 User Manual page 19

2. Many disks have a label on one side and the printed circuit board on the opposite side. With its label side
facing up, gently place the hard disk within the disk tray. Keep the side with the printed circuit board on the
work space and the SATA connector facing to the right. The four tray screw slots should align with the disk's
four screw holes.
3. Using the Phillips head screwdriver, carefully fasten all four screws into the four tray slots. Do not overly
tighten the screws. Doing so can affect the integrity of the screw holes on the disk as well as the threads on
the screws.
LaCie 2big NAS (OS 3.0) | LaCie 5big NAS Pro User Manual 19