LaCie ICA-312 User Manual page 36

Note on IP Address: If you cannot reach the setup wizard using the name of the device, please connect a
VGA monitor to the VGA port located on the back of the 5big NAS Pro. Following the initial boot process, the
system will indicate MAC and IP addresses. If the monitor is receiving a signal but the image is black, try
connecting a USB keyboard to one of the USB ports on the back of the device. The system may have
reverted to energy conservation mode which you can exit by striking one of the keys on the USB keyboard.
Next Steps
Simplify NAS access: LaCie recommends that you install the software utility LaCie Network Assistant before
moving forward with the device configuration. LaCie Network Assistant gives you instant information on your
LaCie NAS, such as firmware version, IP address, and hardware address. It will also provide quick access to
shares (volumes) and the Dashboard. See
Configure your NAS: For details on how to configure and use your LaCie NAS, go to
Transfer Files and Dashboard
Add your LaCie NAS to Wuala Cloud Storage: Enhance your data workflow with LaCie's Hybrid Cloud.
Wuala is secure cloud storage that will give you access to your LaCie NAS from any computer with a
connection to the internet. Further, Wuala uses high-end encryption to guarantee that no one, not even LaCie,
can access your files. See
LaCie 2big NAS (OS 3.0) | LaCie 5big NAS Pro User Manual
LaCie Network Assistant
(Administration).
Hybrid Cloud: Wuala & LaCie NAS
for instructions.
for details.
Shares: Access and
36