LaCie ICA-312 User Manual page 7

LED BEHAVIOR AND BUTTON FUNCTIONS
The front and rear LEDs indicate drive status and activity. This section describes the behavior of the LED
indicators. Note that even if you have turned off the front LED using Dashboard > Eco Management, events
triggering a red light will always cause the front LED to turn on.
Front LED
Rear LED Color
Color
Activity LED for working disk(s)
Blinking blue
(until they are fully initialized)
Activity LED for working disk(s)
Solid blue
Blinking blue/red
Blinking
blue/red
Activity LED for working disk(s)
Activity LED for working disk(s)
Solid red for non-functional disk(s)
Blinking red
Activity LED
Activity LED for working disk(s)
Solid red
Solid red for non-functional disk(s)
Off in disconnected disk(s)
LaCie 2big NAS (OS 3.0) | LaCie 5big NAS Pro User Manual
State
Occurs as the device is booting; will cease once the
drives are fully initialized
Drive working (read/write)
RAID synchronizing; will cease once operation has
concluded
Operating system update in progress
RAID is degraded; data is intact but the array is no
longer protected should another disk fail
Temperature alert (first level)
Fan is not spinning
Power supply has been cut but power is still being
supplied through the UPS
Temperature alert (critical level) – the product will
shut off
Power supply has been cut and the UPS has run out of
reserve power – the product will shut off
RAID has failed and data has been lost
Disk(s) is/are disconnected
7