2.
Many hard disks have a label on one side and the printed circuit board on the opposite side. With its label
side facing up, gently place the hard disk within the hard drive tray. Keep the side with the printed circuit
board on the work space and the SATA connector facing to the right. The four tray screw slots should align
with the hard disk's four screw holes.
3.
Using the Phillips head screwdriver, carefully fasten all four screws into the four tray slots. Do not overly
tighten the screws. Doing so can affect the integrity of the screw holes on the hard drive as well as the
threads on the screws.
LaCie 2big NAS (OS 3.0) | LaCie 5big NAS Pro User Manual
31