Calling A Different Party; Message Templates - Aastra DT4x3 DECT Telephones User Manual

User Manual
Aastra DT4x3 DECT Telephones
1 Receive the text message and call the message sender as described in
page 44.
2 Wait for the called party to reply. The message is replaced by the ongoing call details.
The user may now:
• Continue with the call without referring back to the received message.
• Redisplay the message and continue the call to further review and discuss the
message. See
• Redisplay the message and terminate the call. See
Terminate the Call

10.2.2 Calling a Different Party

To call another party to read and review a received text message, perform the following
steps:
1 Open the message as described in
soft key.
2 From the pop-up menu, navigate to the "Call" menu item and press the "Select" soft
key. The pre-dial screen is displayed. Enter the number of the party to be called or
select a number from the handset call list or local or central phone books.
3 Press the "Call" soft key and wait for the called party to reply. The message is
replaced by the ongoing call detail. The user may now:
• Continue with the call without referring back to the received message.
• Redisplay the message and continue the call to further review and discuss the
message. See
• Redisplay the message and terminate the call. See
Terminate the Call
Redisplay the Message and Continue with the Call
1 To redisplay the message while the call is ongoing, select the "More" soft key.
2 From the pop-up menu, select "Messaging".
From the Messaging menu, select "Inbox". The received message summary is
3
displayed.
4 Press the "View" soft key to display the message in full. If required, use the four-way
navigation key to scroll up and down a long text message to reveal the content while
reviewing and discussing the message with the called party.
Redisplay the Message and Terminate the Call
1 Press
by the redisplayed text message.

10.3 Message Templates

Predefined messages contained in message templates can be used in a number of different
situations to quickly construct a message rather than having to construct the message
completely from scratch.
Up to five predefined messages can be configured for the handset in the PDM/Device
Manager. This lets the user select and send a message appropriate to the current situation,
such as "I am in a meeting" or "I am in the operating theatre".
31 October 2013 / Ver. C
Redisplay the Message and Continue with the Call
on page 65.
7.4 Messaging
Redisplay the Message and Continue with the Call
on page 65.
. The call is terminated and the ongoing call summary details are replaced
TD 92789EN
Call Sender
on page 65.
Redisplay the Message and
on page 42 and press the "More"
on page 65.
Redisplay the Message and
on
65