Headset - Aastra DT4x3 DECT Telephones User Manual

User Manual
Aastra DT4x3 DECT Telephones
Pair/Connect Bluetooth Headset
To be able to use a Bluetooth headset, it must first be paired with the handset. It is only
needed to pair the Bluetooth headset once. A paired Bluetooth headset is automatically
connected, as indicated by the icon
1 Set the Bluetooth headset in pairing mode, see the user manual for the Bluetooth

headset.

2 Enable Bluetooth, see
3 Enter the menu by pressing "Menu".
4 Select
5 Select "Bluetooth".
6 Select "Headset".
7 Select "Add new". A Put headset in Pairing mode dialog window is displayed.
8 Press "OK". It now searches for a Bluetooth headset for connection.
9 When headset is found, press "Pair".
10 If needed, enter PIN code, see user manual for the Bluetooth headset. Press "OK".
The dialog Successful pairing appears if the pairing process was successful. The
Bluetooth headset is also connected as indicated by the icon
headset.
TIP: It is possible to configure the headset button with a specific function, such as post-dial,
dial last called number, or dial a predefined number. See the handset's Configuration Manual
for more information.
7.8.2 Headset
To achieve optimal audio quality with the different headset types, it is recommended to
select the corresponding headset type.
The default setting is microphone on a boom, that is, the audio is optimized for using a
headset with microphone on a boom. The headset type can be changed in the menu by
doing as follows:
1 Enter the menu by pressing "Menu".
2 Select
3 Select "Headset".
4 Select the corresponding headset type from list, that is, "Mic on boom", or "Hearing
protection". Additional headsets
5 Press "Select".
TIP: It is possible to configure the headset button with a specific function, such as post-dial,
dial last called number, or dial a predefined number. See the handset's Configuration Manual
for more information.
NOTE: When Bluetooth is disabled and having an active call in loudspeaker mode on an
intrinsically safe handset, the audio is not transferred to the headset when connecting it.
IMPORTANT:
10.Only visible if a headset profile has been configured in the PDM/Device Manager.
31 October 2013 / Ver. C
in front of the headset.
Enable Bluetooth
in the menu.
in the menu.
10
The headset Microphone on a boom is not available as accessory for the
intrinsically classified handset. If used, it is NOT permitted to use the headset
in hazardous areas.
Connection.
might be visible in the list.
TD 92789EN
in front of the
58