Procedure Call - Aastra DT4x3 DECT Telephones User Manual

User Manual
Aastra DT4x3 DECT Telephones
8

Procedure Call

When configuring the functions Call services, In Call menu, Contacts, or a shortcut/service to
the Phone call function, the data added in these functions is static. When entering the data
for the function to be used, it is possible to add a variable/character U that allows the user
to enter additional numerical characters before calling the number/sending the data to a
system.
See the following example for more information.
Example of configuration:
A user wants to create a service with the Phone call function. The PBX requires that a prefix
must be added to a phone number. In this case, the user can pre-program the prefix and
then enter the applicable phone number when using the Phone call function.
1 Press "Menu", or the confirmation button.
2 Select "Services".
3 Select "Add new".
4 In the Name field, enter "Call no.".
5 Select the function "Phone call".
6 In the Number field, enter the prefix to be used followed by the character "U". In this
case, the text string is as follows *21*U. The character U represents an Enter number
dialog where the user can enter the phone number.
7 Press "Save".
When using the function, an Enter number dialog appears, see figure below. If the user
enters "123" (or selects a contact with this number by pressing
the number *21*123 is dialed. Note that no call is established before the user presses "OK",
that is, post-dial.
Figure 7. Enter number dialog.
31 October 2013 / Ver. C
13:00
Services
Enter number:
123
OK Back
TD 92789EN
) and presses "OK",
62