Write New Messages - Aastra DT4x3 DECT Telephones User Manual

User Manual
Aastra DT4x3 DECT Telephones
5 Press "View".
6 Press "More".
7 Select "Save number".
8 Select "Work Number", "Mobile number", or "Other number".
9 Press "Add".
10 Enter name. See
11 Press "OK".
12 Press "Save". The number is saved in the contact list.
7.4.2

Write New Messages

A message can be constructed from scratch, or from a predefined template that can be used
as it is or edited. For additional information about message templates, see
Templates
be less depending on the character set used.
The first character entered is always upper-case, followed by lower-case character. However,
this may be overridden by pressing the * -key before entering the character.
When pressing a key, the first available character for that key is displayed, see See
Alphanumeric Keys
key until that character appears in the display.
The keys 0-9, * or # can be used. Keys 0 and 1 contains special characters, see See
Alphanumeric Keys
For example, to enter the character E, press key 3 twice. "E" appears in the display and is
selected after a timeout or when another key is pressed.
TIP: If the system supports UTF-8 character encoding, the input language can be changed
temporarily by long pressing
foreign language.
To delete a character, press "Clear".
To construct and send a message, perform the following steps:
1 Enter the menu by pressing "Menu".
2 Select
3 Select "Write new message".
4 Write the message from scratch or select a message template by pressing the "More"
soft key and, if required, edit the message as described in
Menu
NOTE: The "More" key is not displayed if no message templates have been defined.
5 Press "Send".
NOTE: A message can be saved and sent later by pressing the soft key "Back" and
select "Yes". The message is stored under Unsent messages. See
Messages.
6 Enter number, or press
company phonebook.
7 Press "Send".
31 October 2013 / Ver. C
2.1.2 Alphanumeric Keys
on page 65 . The maximum message length is normally 160 characters but may
on page 8. To enter the other characters supported by the key, press the
on page 8 to see all characters.
in the menu.
on page 66.
on page 8.
. This can be used to temporarily access characters in a
to access contacts in the local phonebook and the
TD 92789EN
10.3 Message
2.1.2
2.1.2
10.3.1 The Templates
7.4.3 Unsent
45