Re-Join A Group; Call Services - Aastra DT4x3 DECT Telephones User Manual

User Manual
Aastra DT4x3 DECT Telephones
4 Select PTT group.
5 Press "Call", or
TIP: Alternatively, when in idle mode, press
7.1.8

Re-join a Group

Re-join a Group from Call List
If a PTT invitation was received as a call and the user rejected or missed it, the PTT group can
be dialed from the Call list or Missed calls, respectively. The PTT invitation is indicated by the
icon in the list. See
7.1.9

Call Services

Note: These functions are system dependent. In addition to the default Call services
functions, up to 10 additional system specific call services can be defined, with or without
automatic disconnection. The parameters are set up in the PDM/Device Manager. See the
handset Configuration Manual.
Absence Handling
The reason for being absent and the return time can be specified here.
1 Enter the menu by pressing the "Menu" soft key.
2 Select
3 Select "Call services".
4 Select "Absence".
5 Select the applicable absence reason in the list. The number of absence reasons (for
example "Lunch", "Meeting", "Trip" etc.) are configured in the PDM.
6 Press "Select.
7 Enter time (HHMM) or date (MMDD) depending on the selected absence reason.
8 Press "OK".
The handset sends an absence reason code to the system by establishing a call. The call is
automatically disconnected after a few seconds.
Deactivate the Absence Setting
1 Enter the menu by pressing the "Menu" soft key.
2 Select
3 Select "Call services".
4 Select "Absence".
5 Select "Deactivate".
6 Press "Select".
Divert Internal/External Calls
1 Enter the menu by pressing the "Menu" soft key.
2 Select
6.Only available if PTT group(s) is defined in handset via PDM/Device Manager.
31 October 2013 / Ver. C
.
7.1.1 Call List on page 33, or
in the menu.
in the menu.
n the menu.
quickly, select PTT group, and press
7.1.2 Missed Calls on page 35.
TD 92789EN
.
37