Aastra DT4x3 DECT Telephones User Manual page 56

User Manual
Aastra DT4x3 DECT Telephones
Set Alert for Messages
1 Enter the menu by pressing "Menu".
2 Select
3 Select "Sound & Alerts".
4 Select "Message alert".
5 Select the wanted message alert from the list. By pressing "Play" it is possible to
listen to the different alerts.
TIP: The option Custom sound should be selected you want to create an own message
alert. See the handset's Configuration Manual for more information.
NOTE: The "Play" soft key is not available for Enhanced beep and Custom sound.
Instead, send a message to the handset to listen to the sound.
NOTE: The "Play" soft key is not available for Enhanced beep. Instead, send a message
to the handset to listen to the sound.
6 Press "Back".
TIP: By default, the message volume follows the ring volume setting, but it is possible to set
another message volume in the handset. See the handset's Configuration Manual for more
information.
Turn the Vibrator On and Off
If the vibrator is activated, the handset vibrates on incoming calls and messages.
TIP: The handset vibrator can also be activated when receiving a message during a call via
PDM/Device Manager. See the handset's Configuration Manual.
NOTE: When the vibrator is enabled on an intrinsically safe handset, the handset alternates
between vibration and sound. That is, vibration and sound are not activated simultaneously.
1 Enter the menu by pressing "Menu".
2 Select
3 Select "Sound & Alerts".
4 Select "Vibrator alert".
Select "On", "On if silent" (that is, the vibrator is on when the handset is muted), or
5
"Off"
6 Press "Back".
Set the Key Sound
This means that every time a key is used, the handset emits a small sound.
1 Enter the menu by pressing "Menu".
2 Select
3 Select "Sound & Alerts".
4 Select "Key sound".
Select "Silent, "Click", or "Tone". 
5
It is possible to listen to the key sound by pressing "Play".
6 Press "Back".
31 October 2013 / Ver. C
n the menu.
in the menu.
in the menu.
TD 92789EN
50