Call Diversion; Declining A Call With A Predefined Message; Emergency Calls - Aastra DT4x3 DECT Telephones User Manual

User Manual
Aastra DT4x3 DECT Telephones
• This function can also be activated by selecting another answering method, that is,
"Automatically" and/or "Loudspeaking". See
5.5

Call Diversion

Internal calls, external calls, calls when busy, or calls at no answer can be diverted to another
telephone number.
The diversion is made via the Calls menu > Call services > Divert calls. See
on page 37.
It is also possible to create a shortcut to the "Call Services" function or activate a call service
when a profile is activated. See the handset's Configuration Manual for information.
NOTE: PBX settings for the call diversion must be set to show the Divert calls menu in the
handset. See the handset's Configuration Manual.
5.6

Declining a Call with a Predefined Message

A call may be declined with a predefined message by the called party provided that both
parties are connected via an IP-DECT system. To decline a call with a predefined message
when the handset rings, perform the following steps:
1 In response to the "Reply with a message template?" prompt, press the "Yes" soft key
to send a message to the caller. A list of predefined messages is displayed in the
"Templates" menu.
2 Select, and if required, edit the message as described in
on page 66.
3 Click the soft key "Send". The calling party number is displayed in the handset
display.
4 Click the soft key "Send". A "Message sent" confirmation is displayed and the
message is sent to the caller.
5.7

Emergency Calls

If configured in the PDM/Device Manager, any one of up to five emergency numbers can be
called. An emergency number can be called even if the handset or keypad has been locked.
For additional information, see sections
Phone Lock Settings
31 October 2013 / Ver. C
7.7.2 Keypad Lock Settings
on page 52.
7.7.6 Answering on page 55.
10.3.1 The Templates Menu
on page 51 and
TD 92789EN
7.1.9 Call Services
7.7.3
30