User Manual
Aastra DT4x3 DECT Telephones
7.8.4
In Charger Action when in Call
It is possible to determine actions to be performed when a handset is placed in charger
during a call.
1
Enter the menu by pressing "Menu".
2
Select
3
Select "In charger".
4
Select "Call behavior".
5
Select one of the following:
• No action - no action is performed when handset is placed in charger during a call.
• Loudspeaking - The loudspeaker is activated when handset is placed in charger
during a call.
• End call - The call is disconnected when handset is placed in charger.
7.8.5
In Charger Action when not in Call
It is possible to determine actions to be performed when a handset is not in call and placed
in charger.
Note: Additional In charger actions can also be configured, see the handset's Configuration
Manual.
1
Enter the menu by pressing "Menu".
2
Select
3
Select "In charger".
4
Select "Other actions".
5
Select one of the following:
• No action - no action is performed when handset is not in call and placed in
charger.
• Switch off - When the handset is placed in the charger it will switch off. When it is
removed from the charger it will switch on again.
• Sound off - The handset is muted when placed in the charger. When it is removed
from the charger it switches on the sound again. NOTE: Messages with
breakthrough, for example high or alarm priority, is not muted.
• Redirect - Calls can be redirected to another extension when the handset is placed
in a charger. This function must be programmed in the PBX to be able to redirect
calls.
• Change profile - when the handset is placed in the charger it changes profile.
When the handset is removed from the charger, the profile is changed back.
Press "Edit" and select the wanted profile. By default only the profile Normal is
visible, but additional profiles is visible if they are configured. See
page 41.
31 October 2013 / Ver. C
in the menu.
in the menu.
TD 92789EN
7.3 Profiles
on
61