Aastra DT4x3 DECT Telephones User Manual page 92

User Manual
Aastra DT4x3 DECT Telephones
Note: Your Bluetooth headset may have more or less functions than described here, refer to
the Manual for the Bluetooth headset.
A.5 Operation
A.5.1 Enable Bluetooth
To enable the Bluetooth function enter
select "Enable".
Note: When enabling Bluetooth on an intrinsically safe handset, it is restarted.
A.5.2 Pair and Connect a Bluetooth Headset
Before a headset can be used, a connection (pairing) between the headset and the handset
must be established.
1 Place the Bluetooth headset and the handset next to each other.
2 Enable Bluetooth, see
3 Put the Bluetooth headset in pairing mode, see the user manual for the Bluetooth
headset.
4 Enter the menu by pressing "Menu".
5 Select
6 Select "Bluetooth".
7 Select "Headset".
8 Select "Add new". An information text "Put headset in Pairing mode" is displayed.
9 Press "OK". It will now search for a Bluetooth headset for connection.
10 When headset is found, press "Pair".
11 If needed, enter PIN code, see user manual for the Bluetooth headset. Press "OK".
The dialog Successful pairing appears if the pairing process was successful. The
Bluetooth headset will also be connected indicated by the icon
headset.
A.5.3 Add another Bluetooth Headset
Up to eight Bluetooth headsets can be paired to the handset, but only one at a time can be
selected. To pair another headset repeat section "Pair and Connect a headset" steps 1-6.
The paired headsets are displayed by a default name in the handset menu "Headset". See
A.5.6 Change the name of Bluetooth headset
A.5.4 Select a Bluetooth Headset
To activate a Bluetooth headset, enter
"Headset". Step with the navigation key,
"Select". Connection successful is displayed. The headset is now selected.
31 October 2013 / Ver. C
Step between the menus with the navigation key. Confirm each menu
selection by pressing the Soft key "Select".
A.5.1 Enable
in the menu.
in the handset menu, select "Bluetooth" and
Bluetooth.
in the handset menu, select "Bluetooth" >
and to the headset to be selected and press
TD 92789EN
in front of the
86