Alphanumeric Keys; Icons And Text In The Display - Aastra DT4x3 DECT Telephones User Manual

User Manual
Aastra DT4x3 DECT Telephones
2.1.2

Alphanumeric Keys

NOTE: Depending on the selected menu language and character setting in the CPDM3, other
characters can be available. This means that the character order can differ from the figure
below.
g h i î 4
p q r s β 7
Figure 1. Available Characters.
In Idle Mode, and Number Input Mode
• A short press on a key enter the digits "0" - "9" and the characters * and #.
• Enter a pause in number input mode by a long press on
"P" in the display.
• A long press on
the display.
In Text Input Mode
• A short press on a key 0-9, displays the first available character on that specific key. The
marked character is selected after a timeout, or when another key is pressed.
• To change to upper/lower case, press
The
• To add space in the text, make a short press on key 0.
• The first character entered in a message, or when adding or editing a name in the
Contacts menu, is an upper level character followed by lower level characters, unless
is pressed before entering the character. To switch between "Abc", "ABC", "abc",
and "123", press
2.1.3

Icons and Text in the Display

All functions and settings available to the user are shown as icons and text in the display.
The icons and text in the display indicate functions and settings the user has access to. The
display normally displays date and time, the Owner ID and handset number. The Owner ID
can manually be set by the user.
31 October 2013 / Ver. C
Figure 1.
a b c à â ä æ ç 2
. , ? ! - ' " 1 d e f é è 3
#
Space + * 0
changes the tone sender on. Tone sender on is indicated by a "T" in
can also be used to display only the digits.
. A long press on
j k l 5
m n o ñ ò ö ø 6
w x y z 9
t u v ù ü 8
. A pause is indicated by a
before entering the character. 
displays special characters.
TD 92789EN
8