Aastra DT4x3 DECT Telephones User Manual page 93

User Manual
Aastra DT4x3 DECT Telephones
When a new headset has been selected any previous headset will automatically become
disconnected.
A.5.5 Remove a Bluetooth Headset
To remove a Bluetooth headset, enter
Headset. Step with the navigation key,
"More". Select "Delete". Confirm with "Select".
A.5.6 Change the name of Bluetooth headset
The name, in the headset list, of the headset is the default name for the headset.
To change the name enter
navigation key,
Alphanumeric Keys
A.6 Calling
A.6.1 Make a Call
Dial the number on the handset and press "Call", or
displayed press "No" or ignore the message to use the Bluetooth Headset. Press "Yes" to use
the handset.
A.6.2 Answer a Call
A ring signal sounds in both the selected Bluetooth headset and the handset to signal an
incoming call.
To answer the call in the Bluetooth headset, press the button
To answer the call in the handset, press
A.6.3 End a Call
To end the call press the button
A.7 Volume/Mute Control
A.7.1 Adjust the Volume During a Call
Depending on the Bluetooth headset it may be possible to adjust the volume on the
17
headset . On the handset, press
in the headset.
A.7.2 Turn the Microphone On/Off During a Call
Mute both headset and handset by pressing
13. For instruction, see headset manual.
31 October 2013 / Ver. C
and
in the menu, select "Bluetooth" > "Headset". Step with the
and , to select the headset. Select "More" > "Edit name". See
on page 8.
17
on the headset, or
to increase the volume and
in the handset menu, select Bluetooth >
to the headset to be removed and press
. When "Transfer call to phone?" is
13
on the headset.
on the handset.
on the handset.
or on the handset.
TD 92789EN
2.1.2
to decrease the volume
87