Aastra DT4x3 DECT Telephones User Manual page 66

User Manual
Aastra DT4x3 DECT Telephones
8 Enter PARK code (max. 31 digits). The PARK code may not be needed if there is no
alien DECT system within the coverage area.
9 Enter AC code. The AC code length must be between 4 - 8 digits.
10 Press "Next".
11 An information text "Protection on?" is displayed. Select "Yes" if the new system is to
be protected. It is not possible to delete a protected subscription from the System
menu
12 Press "OK". A searching mode starts.
Unsubscribe System
1 Enter the menu by pressing "Menu".
2 Select
3 Select "System".
4 Select "Unsubscribe".
5 Select the system to unsubscribe.
6 Press "Yes to unsubscribe the system.
Rename System
It is possible to change the name of the system in the handset.
1 Enter the menu by pressing the "Menu" soft key.
2 Select
3 Select "System".
4 Select "Rename System".
5 Select system to rename.
6 Enter new name.
7 Select "Save".
Priority
The default order of priority is the order of entered subscriptions. This means that the first
subscribed system has the highest priority. This list can be edited by the user. It is possible
to set the systems in priority by moving them up or down in the list.
NOTE: This is used in combination with system set to be "Automatic", see
page 59.
1 Enter the menu by pressing "Menu".
2 Select
3 Select "System".
4 Select "Priority".
5 Change the priority if needed by selecting "Up" or "Down". The priority is saved when
"Back" is selected.
11.It is not possible to unsubscribe a protected system via the System menu. The unsubscribtion must be made via the
Admin menu or the DECT system.
31 October 2013 / Ver. C
11
.
in the menu.
in the menu.
in the menu.
TD 92789EN
Change System on
60