Chapter 7 — Setup Mode
Navigating in Setup Mode
68
Enter the Setup Mode by pressing Setup on the printer's front
panel. Text in the display guide you through the setup procedure.
Use the printer's keyboard to navigate menus, acknowledge
displayed values, or select or enter new values.
Note: An external keyboard cannot be used inside the Setup
Mode.
Keyboard Buttons for Setup Mode
Button
Function
Move one step back on the same level.
Move up one level and escape without changing
the setting.
Move forward on the same level.
Move down one level.
Acknowledge and move to next menu.
Exit the Setup Mode. Can be used anywhere in
Setup Mode.
The Setup Mode is organized as an endless loop with a number
of sub-categories. At startup, the firmware determines if an
EasyLAN interface board is installed in the printer. If so, the
Network setup menus are shown in the Setup Mode.
The diagram on the next page shows the options in the main
loop. Detailed overviews are shown on the following pages.
EasyCoder PX4i Bar Code Label Printer User's Guide (IPL Version)