Test/Service; Testprint - Intermec EasyCoder PX4i User Manual

Test/Service

EasyCoder PX4i Bar Code Label Printer User's Guide (IPL Version)

Testprint

This part of the Setup Mode allows you to print various types of
test labels. Go to the desired option and press Enter. The printer
will start printing the test label or labels. Press Feed/Pause to
hold the printing temporarily. To resume printing, press Feed/
Pause again. The following options are available:
Configuration
Choose software (SW), hardware (HW), or network.
The Software Configuration Label contains:
• Current configuration parameters stored in the printer's
memory
• Defined pages
• Defined formats
• Defined graphics
• Defined fonts
• Any installed printer options
The Hardware Configuration Label contains:
• Printer memory information
• Printer mileage
• Printhead settings
• Firmware checksum, program, and version number
The Network Configuration Label contains:
• WINS Name
• MAC Address
• IP Selection
• IP Address
• Netmask
• Default Router
• Name Server
Chapter 6 — Setting Up the Printer
59