Intermec EasyCoder PX4i User Manual page 80

EasyCoder PX4i Bar Code Label Printer User's Guide (IPL Version)
4 Within 10 seconds, press Enter to reset the printer to factory
default. The parameters will be reset and the printer will
continue the normal startup.
If you press /Esc or wait until the 10 seconds time-out has
passed, the normal startup process will continue without any
reset being performed.
Note: Resetting to the factory default will reset all files used to
store settings, but it does not affect settings that were already
loaded before the files were removed. This means that, for
example, EasyLAN Wireless settings (SSID, keys, etc.) retain
their values until the next reboot. To reload all settings, simply
reboot after performing a reset.
Chapter 6 — Setting Up the Printer
65