Description - Intermec EasyCoder PX4i User Manual

Chapter 6 — Setting Up the Printer

Description

54
The setup controls the printer in regard of serial communication,
test and service operations, and specifies which types of media
and ribbon are loaded in the printer.
Check the list below to see if the printer's default setup matches
your requirements. If not, you will have to change the setup. To
enter the Setup Mode, press Setup on the printer's
built-in keyboard and follow the instructions in
on page 67.
EasyCoder PX4i Bar Code Label Printer User's Guide (IPL Version)
"Setup Mode"