Keyboard; Beeper - Intermec EasyCoder PX4i User Manual

Chapter 2 — Installation

Keyboard

Beeper

14
The keyboard is of the membrane-switch type and has seven keys.
The keyboard is supplemented by a large Feed/Pause button.
Some keys have hard-coded functions in the startup and setup
modes.
Keyboard Buttons
Button
Feed/Pause button
+
The beeper acknowledges that a key has been pressed. Optionally,
an audible alarm can be enabled using an IPL command. It will
start beeping at paper out and ribbon out and will continue
beeping until the start of reload.
EasyCoder PX4i Bar Code Label Printer User's Guide (IPL Version)
Function
Feeds a page or pauses a print job. Repeats last
printed label.
Enter Setup Mode. For more information, see
"Setup Mode" on page
Feed out a blank label or the equivalent.
Perform a Testfeed (feed a blank label and
adjust the media feed).
Display error messages
and communication channel information.
Scroll between types of information after
pressing i. Possible error messages and
information on active communications
channels are shown in a loop.
67.