Setup Parameters; Serial Communication; Baud Rate - Intermec EasyCoder PX4i User Manual

Chapter 6 — Setting Up the Printer

Setup Parameters

Serial Communication

56
Configuration
Label taken sensor
Print speed
The serial communication parameters control the
communication between the printer and the connected computer
or other devices on the serial port.
Note: The serial communication parameters have no effect on
parallel or EasyLAN communications.
Make sure the printer's communication parameters match the
setup of the connected device or vice versa. If the setup of the
printer and the setup of the host do not match, the response from
the printer to host will be garbled.

Baud Rate

The baud rate is the transmission speed in bits per second. There
are 8 options:
• 1200
• 2400
• 4800
• 9600 (default)
• 19200
• 38400
• 57600
• 115200
EasyCoder PX4i Bar Code Label Printer User's Guide (IPL Version)
Not installed
5 in/sec