Chapter 9 — Troubleshooting
Intermec Ready-to-Work Indicator
80
The readiness of the printer, individually or as a part of a
solution, is indicated by the blue Intermec Ready-to-Work
indicator.
If the indicator blinks or is switched off, the printer is not ready.
Further information can be obtained in the display window by
pressing i. In case of several errors or similar conditions occurring
simultaneously, only the most significant error is displayed. Once
this error has been cleared, next remaining error is displayed.
Provided the printer is connected to a network, all conditions
that prevents printing are reported to the EasyADC Console.
The EasyADC Console is a PC-based software which allows a
supervisor to monitor all connected devices that have an
Intermec Ready-to-Work indicator, including handheld
computers, access points, and printers.
EasyCoder PX4i Bar Code Label Printer User's Guide (IPL Version)