Self-Adhesive Labels (Gap Stock) - Intermec EasyCoder PX4i User Manual

Self-Adhesive Labels (Gap Stock)

EasyCoder PX4i Bar Code Label Printer User's Guide (IPL Version)
(a) External Media Width (including liner)
Minimum: 25 mm (1.00 in)
Maximum: 120 mm (4.72 in)
(b) Liner Width
The liner must not extend more than a total of 1.6 mm (0.06 in)
past the edge of the face material and should protrude equally on
both sides.
(c) Internal Media Width (excluding liner)
Minimum: 23.8 mm (0.94 in
Maximum: 118.4 mm (4.66 in)
(d) Label Length
Minimum (without LTS): 8 mm (0.32 in)
Minimum (with LTS): 12 mm (0.47 in) For more information,
see "Label Taken Sensor" on page
Maximum:6,143 mm (241 in), provided that there is a sufficient
amount of free SDRAM memory
(e) Label Gap
Recommended: 3.0 mm (0.12 in)
Minimum: 1.27 mm (0.05 in)
Maximum: 25.0 mm (0.98 in)
The Label Stop Sensor must be able to detect the extreme front
edges of the labels. For more information, see
Sensor" on page 104.
Media Type Setup: Gap Stock
Appendix B — Media Specifications
77.
"Label Stop
117