Display - Intermec EasyCoder PX4i User Manual

Display

EasyCoder PX4i Bar Code Label Printer User's Guide (IPL Version)
Status (flashing green) indicates that the printer is
communicating.
Status (solid red) indicates an error condition (see
"Troubleshooting" on page
Intermec Ready-to-Work indicator (blue; on, blink, or off ). The
indicator has three different states: On, Blinking, and Off. When
the indicator is On, the printer is ready for use. When the
indicator is blinking, the printer may be initializing, waiting for
external resources, or in need of user attention. When the
indicator is off, the printer is not ready to operate.
The display window contains an LCD (Liquid Crystal Display)
with background illumination and two lines of text, each with 16
characters. It shows a message when certain errors occur and
guides the operator through upgrading, startup, and setup. The
following errors are reported:
Error Messages and Conditions
Message Displayed
PAUSE
PAPER OUT
RIBBON OUT
PRINT HEAD UP/PRESS
FEED
OPEN&SHUT CUTTER Cutter error
RIBBON FITTED
PAPER FAULT
PSU ERROR
PSU OVER TEMP
PRINTHEAD HOT
Chapter 2 — Installation
79).
Error Condition
Empty/Paused
Out of media
Out of ribbon
Printhead lifted
Ribbon fitted
Paper fault
Power supply error
Power supply too hot
Printhead too hot
13