Product Identification - Intermec EasyCoder PX4i User Manual

Product Identification

EasyCoder PX4i Bar Code Label Printer User's Guide (IPL Version)
• Moving parts are exposed when the side doors are open, so
ensure that the doors are closed before you operate the printer.
• Do not remove the left-hand cover. Dangerous voltage!
• Do not remove the bottom plate. Dangerous voltage!
• Do not put your fingers inside the print mechanism when the
power is on.
• Place the printer on an even surface which can support its
weight of approximately 13 kg (28.5 lb) plus supplies.
• Do not spray the printer with water. If you are using a hose to
clean the premises in an industrial environment, remove the
printer or protect it carefully from spray and moisture.
• Carefully read the warning text on the envelope before using a
cleaning card.
The machine label is attached to the printer's rear plate and
contains information on type, model, and serial number as well
as AC voltage. It also contains regulatory agency markings
indicating compliance with specific agency regulations, if any.
Chapter 1 — Introduction
3