Test/Service; Testprint - Intermec EasyCoder PM4i User Manual

Chapter 6—Setting Up the Printer

Test/Service

Testprint

This part of the Setup Mode allows you to print various types of test
labels. Go to the desired option and press <Enter>. The printer will start
printing the test label or labels. Press the <Feed/Pause> button to hold
the printing temporarily. To resume printing, press the <Feed/Pause>
button again. The following options are available:
Confi guration
Select between software (SW), hardware (HW), and network.
The Software Confi guration Label contains:
• Current confi guration parameters stored in the printer's memory
• Defi ned pages
• Defi ned formats
• Defi ned graphics
• Defi ned fonts
• Any installed printer options
The Hardware Confi guration Label contains:
• Printer memory information
• Printer mileage
• Printhead settings
• Firmware checksum, program, and version number
The Network Confi guration Label contains:
• WINS Name
• MAC Address
• IP Selection
• IP Address
• Netmask
• Default Router
• Name Server
• Mail Server
• Primary WINS Server
• Secondary WINS Server
• Network Statistics
Intermec EasyCoder PM4i—User's Guide (IPL version) 47