Optional Settings - Cal/Hr Display Enable/Disable - Life Fitness Lifecycle LC9500 Service Manual

Lifecycle Upright Bikes LC95, LC91, LC85, C9, C7, 95Ce, 95Ci, 93Ci, and 90C

OPTIONAL SETTINGS - CAL/HR DISPLAY ENABLE/DISABLE

C A L / H D I S P O F F
If this option is enabled, the MESSAGE CENTER displays the Calories/Hour equivalent of the workload. This
message will only be displayed after a level change.
The DOWN ARROW will turn OFF the CAL/H program.
The UP ARROW will turn ON the CAL/H program.
The ENTER key LED indicates when the value is at the default setting of CAL/H PROGRAM ON.
The value is stored in EEPROM and is kept when the bike is not in use.
Press the ENTER key to advance to the next diagnostic state. Press the CLEAR key to the previous diagnostic
state, or repeated pressing to exit diagnostics.
24