Life Fitness Lifecycle LC9500 Service Manual page 104

Lifecycle Upright Bikes LC95, LC91, LC85, C9, C7, 95Ce, 95Ci, 93Ci, and 90C
How To... Remove the Console Post Assembly, Main cable and Coax (on
LCD only)
Special Service Tools: NONE
Frame
Assembly
1. Remove the handle bars. Refer to, How To... in this section.
2. Remove the console and if equipped, the accessory tray. Refer to, How To...in this section.
3. Remove the left side shroud. See How To...Remove Shrouds.
4. Unplug the main console cable from the power control board (large connector).
5. Remove four mounting screws securing the console support elbow to the frame, and lift the console post and
elbow out of the frame.
6. Remove the side covers from the support elbow and discard the console post.
7. Replace the console post in the reverse order of removal.
Console
Post
Console
Post Screws
26
End Cap
Console
Cable
Console
Post
Console
Support Elbow
and Screws
Cover and
Mounting
Screws