Inverter Board - Life Fitness Lifecycle LC9500 Service Manual

Lifecycle Upright Bikes LC95, LC91, LC85, C9, C7, 95Ce, 95Ci, 93Ci, and 90C
How To... Replace the Inverter Board
Special Service Tools Required: NONE
CAUTION! BEFORE REPLACING CIRCUIT
BOARD(S), GROUND YOURSELF TO EARTH
GROUND USING AN ANTI-STATIC GROUND
STRAP.
1. Remove console from unit refer to Display Console
and Accessory Tray Removal.
2. Remove seven screws from the Back Cover and lift
the Back Cover off.
3. Disconnect the Pink/White Power Wire
Connectors (2) from the top of the Inverter
Board, and the 4-Yellow Wires Connector,
which receives Power from the PC to the
Inverter, at the bottom of the Inverter
Board.
4. Remove two Phillips screws securing the
Inverter Board to the back of the LCD
Touch Screen and lift it out.
5.
Install new Inverter Board in reverse order.
Back Cover
Inverter
Board
Pink/White
Power Wire
Connectors(2)
Screws
39
Back Cover
Screws (7)
LCD Touch
Screen
Yellow Wires(4)
Connector
(Power from PC
to Inverter Board)