Optional Console Display; Console Setup; Navigating The Setup Mode - Life Fitness Lifecycle GX Training Manual

OPTIONAL CONSOLE
DISPLAY
IF THE OPTIONAL CONSOLE DISPLAY WAS
PURCHASED, PLEASE REVIEW THE FOLLOWING
INFORMATION.
WARNING: Heart rate monitoring systems may be
inaccurate. Over-exercising may result in serious injury or
death. If you feel faint, stop exercising immediately.
The console will display feedback consisting of: speed,
distance, cadence, calories, time, heart rate (HR), Calories
Per Hour and percentage (%) of HR max. % of HR max
will allow the instructor to implement new and innovative
classes. Current brands supporting the LifeCycle GX are:
DISPLAY 2
Pedal to wake
the console
144
USER LOGO: Quick Press
once for USER MODE,
long press (2 seconds)
112 64
reset display functions
and user data (back
to default)
USER DOWN ARROW:
Quick press once for
ENTER WEIGHT
DISPLAY MODE 1 and 2
14
Polar® and all brands Polar compatible. Accuracy of non-
Polar brands may vary.
The console also has a Display 2 which will show the max
and averages of all the data shown previously, throughout
and at completion of the workout. The computer will
also display the resivstance level (20 available); great for
tracking progress and quantifying the workout.
Correct setup of the console will ensure the user has
accurate feedback and a positive experience.
OK and LOGO:
RPM MAX RPM AVG
108
Press simultaneously
for 3 seconds to enter
SETUP MODE
MPH MAX MPH AVG
44 18
CAL/HOUR AVG
1123
MAX % MAX
OK LOGO:
Short press once
for backlight
UP ARROW:
Quick press
SET UP
once for DISPLAY
CONFIGURATION
MODE 1 and 2
SHOW VERSION
CALIBRATION

CONSOLE SETUP

•
Change language: English, Spanish, German, Italian, French, Dutch, Portuguese
•
Change weight setting: lbs or kg
•
Change system setting: miles or km
•
Configuration: show version, backlight time, touch panel, calibration, exit setup
•
Change backlight timing
•
Change touch panel sensitivity
After setup is completed for the first time, these setup values become default settings.
If the brake is not calibrated a "!" will appear on the console in the LEVEL window. Refer to Assembly
Manual for brake calibration procedure.
NAVIGATING THE
SETUP MODE
1. To enter SETUP mode from other mode,
press and hold the OK and LOGO button
simultaneously for three seconds
2. Use up arrow button and down arrow button to
select language
3. Press OK button
4. Use up and down arrow button to select weight
indicator (lbs or kg) setting for USER mode
5. Press OK button
6. Use up and down arrow button to select system
indicator for distance (miles or km) and speed
(mph or km/h)
7. Use up and down arrow button to show
software version or perform brake calibration
8. Press OK button
9. Exit setup and press OK
15
© 2014 Life Fitness