Life Fitness Lifecycle LC9500 Service Manual page 83

Lifecycle Upright Bikes LC95, LC91, LC85, C9, C7, 95Ce, 95Ci, 93Ci, and 90C
How To... Replace the Crank Shaft Hub Assembly
Special Service Tools: Bearing Service Tool Kit – Part Number: BearingToolKit
1. Remove the crank arm with pedal from the
defective crank shaft hub.
2. Remove the side shrouds. Refer to How
To...Remove Pedals, Pedal Levers, and Side
Shrouds.
3. Remove the main drive belt. Refer to, How
To...Remove Main Drive Belt.
4. Remove the bolt and washer in the center of each hub.
NOTE: The arrow mark on the hub. The other hub
also has same mark 180 degrees apart for proper
crank arm location.
Right Pedal/
Crank Arm
Pedal
Screws(3)
Hub
Arrow
Mark
Hub
Mounting
Bolt
5
Right Shroud
Flat
Washer