Touch Screen Assembly - Life Fitness Lifecycle LC9500 Service Manual

Lifecycle Upright Bikes LC95, LC91, LC85, C9, C7, 95Ce, 95Ci, 93Ci, and 90C
How To... Replace the Touch Screen Assembly
Special Service Tools Required: NONE
CAUTION! BEFORE REPLACING CIRCUIT
BOARD(S), GROUND YOURSELF TO EARTH
GROUND USING AN ANTI-STATIC GROUND
STRAP.
1. Remove console from unit refer to Display
Console and Accessory Tray Removal.
2. Remove seven screws from the Back Cover.
3. Remove the Single Board Computer. See "How
To Replace the Single Board Computer" in this
section.
4. Remove the Interface Board. See "How To
Replace the Interface Board" in this section.
5. Remove the Inverter Board. See "How To Replace the
Inverter Board" in this section.
6. Remove four screws securing the Touch Screen Bracket
Assembly to the bezel Assembly. Remove the Touch
Screen Assembly from the Console.
7. Remove the four nuts securing the LCD/touch screen to
the bracket then separate the bracket from the assembly.
8. Install new Touch Screen in reverse order.
Front
Cover
Touch
Screen
Screws
Touch
Screen
42
Touch Screen
Assembly
Mounting
bracket
Single Board
Computer
Touch
Screen
Screws
Interface
Board
Polar
Cable