Auto Start Switch - Life Fitness Lifecycle LC9500 Service Manual

Lifecycle Upright Bikes LC95, LC91, LC85, C9, C7, 95Ce, 95Ci, 93Ci, and 90C
How To... Remove the Auto Start Switch and Bracket
Special Service Tools: NONE
CAUTION! BEFORE REPLACING
CIRCUIT BOARD(S), GROUND
YOURSELF TO EARTH GROUND
USING AN ANTI-STATIC GROUND
STRAP.
1. Remove the side shrouds. Refer to
How To in this section.
2. Disconnect the auto start switch cable
from the left side of the unit at the
PCB.
3. Remove the screw
securing the auto start
switch to the right side
of the upper frame.
4. Remove the cable and
switch, and if necessary
the mounting bracket by
removing the one
mounting screw.
5. Install new cable and
switch in reverse order.
PCB
Auto Start
Switch Mounting
Bracket
Auto Start
Switch and
Screws(2)
35
Auto Start
Switch Cable