Table of Contents
Advertisement
1.3 Optional Settings for the Lifecycle Exercise Bike
Maximum program time
l
The maximum program time option allows the maximum program time to be changed from
the default maximum time limit of 60 minutes to anywhere from 1 to 99 minutes. Altering the
maximum program time will affect all programs except the Fit Test. To change the Lifecycle
exercise bike maximum program time, proceed as follows:
1. Press and hold the 5 key on the numeric keypad.
2. Begin pedaling (you must reach a minimum of 35 RPM), then press START.
All LEDs and 14-segment displays will be illuminated. This is called Diagnostic State 1.
There are nine distinct Diagnostic States and the maximum program time default settings
reside in Diagnostic State 5. Each time you press the ENTER key you will advance one
diagnostic state. Continue to advance to Diagnostic State 5.
3. When you reach Diagnostic State 5, the current "MAXIMUM DURATION" setting will be
displayed. The default maximum program time is 60 minutes.
4. Use
key to decrease the "MAXIMUM DURATION" or the
"MAXIMUM DURATION".
5. To exit the Diagnostic States, press the CLEAR / PAUSE key repeatedly until you return
to the user display. The user display is the initial display console you see when you
approach the unit for normal operation.
English / Metric Conversion
l
The factory default is set to english measurement. When you reach Diagnostic State 7 (see
above), the Data Entry Window will display ENGLISH to designate english units. To change
the default to metric measurement, press the '5' key and the system will toggle between
english and metric units and display METRIC.
For more information on the other seven Diagnostic States please refer to the Lifecycle
Service Manual available from Life Fitness Customer Support Services. (See How To
Obtain Product Service for information on how they can be reached.)
10
key to increase the
Hide quick links:
Advertisement
Table of Contents
